Made For The AQUION Cans, R410a, Refrigerant, Screw-On Gauge, Hose & 410 Adaptr.

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Made For The AQUION Cans, R410a, Refrigerant, Screw-On Gauge, Hose & 410 Adaptr.
THIS FOR FOR THE ITEMS PICTURED AND DOES NOT, REPEAT-DOES NOT INCLUDE ANY REFRIGERANT.
This is a very special gauge set up that will screw onto, by hand,
to the AQUION 1.43 Lb. Cans Of 410a.
These cans have a  1/4" male flare fitting and allow you to direct charge the system you are working on.
(1) 36"
Blue
Charging hose.
(1) CPD AD87 R410a System Adapter
(1)
Screw
-On
Check
and
Charge
it gauge.
The blue charging hose system end has a valve core depressor and can be used on all systems that have the 1/4" male flare fitting.
This kit also includes a adapter for the R410a systems with the 5/16" larger suction hose fitting.
If you shut the tank valve off it will show you the system pressure.
You don't need to take your whole gauge set on the roof now just throw this in your pocket and you good to go.
It comes with a nice screw-in plug to keep it clean and a cap & strap for the hose connection to keep that fitting clean as well.
Please note, the sticker and the refrigerant can is NOT included in the , this is for the gauge, AD87 adapter and the charging hose as pictured!
Please visit our eBay store and click on the can taper category.
The stickers in the picture are not included and are for reference only!
Thank you!
THIS FOR FOR THE ITEMS PICTURED AND DOES NOT, REPEAT-DOES NOT INCLUDE ANY REFRIGERANT. This is a very special gauge set up that will screw onto, by hand, to the AQUION 1.43 Lb. Cans Of 410a. These cans have a 1/4" male flare fitting and allow you to direct charge the system you are working on. (1) 36" Blue Charging hose. (1) CPD AD87 R410a System Adapter (1) Screw-On Check and Charge it gauge. The blue charging hose system end has a valve core depressor and can be used on all systems that have the 1/4" male flare fitting. This kit also includes a adapter for the R410a systems with the 5/16" larger suction hose fitting. If you shut the tank valve off it will show you the system pressure. You don't need to take your whole gauge set on the roof now just throw this in your pocket and you good to go. It comes with a nice screw-in plug to keep it clean and a cap & strap for the hose connection to keep that fitting clean as well. Please note, the sticker and the refrigerant can is NOT included in the , this is for the gauge, AD87 adapter and the charging hose as pictured! Please visit our eBay store and click on the can taper category. The stickers in the picture are not included and are for reference only! Thank you!
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Made For The AQUION Cans, R410a, Refrigerant, Screw-On Gauge, Hose & 410 Adaptr.
THIS FOR FOR THE ITEMS PICTURED AND DOES NOT, REPEAT-DOES NOT INCLUDE ANY REFRIGERANT.
This is a very special gauge set up that will screw onto, by hand,
to the AQUION 1.43 Lb. Cans Of 410a.
These cans have a  1/4" male flare fitting and allow you to direct charge the system you are working on.
(1) 36"
Blue
Charging hose.
(1) CPD AD87 R410a System Adapter
(1)
Screw
-On
Check
and
Charge
it gauge.
The blue charging hose system end has a valve core depressor and can be used on all systems that have the 1/4" male flare fitting.
This kit also includes a adapter for the R410a systems with the 5/16" larger suction hose fitting.
If you shut the tank valve off it will show you the system pressure.
You don't need to take your whole gauge set on the roof now just throw this in your pocket and you good to go.
It comes with a nice screw-in plug to keep it clean and a cap & strap for the hose connection to keep that fitting clean as well.
Please note, the sticker and the refrigerant can is NOT included in the , this is for the gauge, AD87 adapter and the charging hose as pictured!
Please visit our eBay store and click on the can taper category.
The stickers in the picture are not included and are for reference only!
Thank you!
THIS FOR FOR THE ITEMS PICTURED AND DOES NOT, REPEAT-DOES NOT INCLUDE ANY REFRIGERANT.
This is a very special gauge set up that will screw onto, by hand,
to the AQUION 1.43 Lb. Cans Of 410a.
These cans have a  1/4" male flare fitting and allow you to direct charge the system you are working on.
(1) 36"
Blue
Charging hose.
(1) CPD AD87 R410a System Adapter
(1)
Screw
-On
Check
and
Charge
it gauge.
The blue charging hose system end has a valve core depressor and can be used on all systems that have the 1/4" male flare fitting.
This kit also includes a adapter for the R410a systems with the 5/16" larger suction hose fitting.
If you shut the tank valve off it will show you the system pressure.
You don't need to take your whole gauge set on the roof now just throw this in your pocket and you good to go.
It comes with a nice screw-in plug to keep it clean and a cap & strap for the hose connection to keep that fitting clean as well.
Please note, the sticker and the refrigerant can is NOT included in the , this is for the gauge, AD87 adapter and the charging hose as pictured!
Please visit our eBay store and click on the can taper category.
The stickers in the picture are not included and are for reference only!
Thank you!